Sail Shades with Marine Grade Sunbrella Canvas Fabric

Near waterproof and fade resistant woven acrylic. Sunbrella Sun Sail Shades blocks the Sun.

For the ultimate sun protection solution, try a Sunbrella Shade Sail. Courtyards, pool areas, gardens, children's play areas, car spaces, and even office building areas all benefit from the cool good looks of a Sunbrella Shade Sail. These sails can be mounted to a variety of surfaces and are easy to install. Now you can create a shaded area anywhere around your home or yard and match your colors to your outdoor furniture.

Sunbrella Shade Sails feature Sunbrella breathable fabric to keep you cooler and more comfortable in hot weather. The canvas fabric has a 10-Year UV warranty on fabric - 2 years FULL! and provide you with a UV protection factor of up to 98%. These sails can be mounted to a variety of surfaces and are easy to install. Fly them to create a shaded area anywhere around your home or office. Material is unaffected by moisture and natural temperature extremes. Sunbrella's solution dyed acrylic fabric is fade and water resistant. The near waterproof fabric also resists stains, mildew and rot. The perimeter of each sail contains seatbelt type webbing for increased strength & durability and is designed with a gentle cantenary curve inwards towards the center of the sail to control the fabric tension. Each corner has a welded solid marine grade, stainless steel attachment ring to aid in attaching to a structurally sound fixing point. Shade sails, when installed properly, do not sag or flap in the wind.

Sunbrella Shade Sails are available in several shapes that include squares, rectangles, triangles or custom sized polygons. They can be purchased in your choice of eight great colors. Typical shade sail instructions for installation can be found below. Sunbrella Shade Sails have to be installed with at least an 20 degree slope to allow water to run off the sail and not pool on top of the sail. Due to the limited available Sunbrella fabric widths, there will be seams approximately every 40-57 inches.

Note: Sunbrella material is water resistant, it MUST be mounted at an angle of at least 18-20 degrees to allow water run off.