Sidepost Umbrella Deck Mount Plate DMT
For C-Series, P-Series FIM Sidepost Umbrellas or Flexy Awnings
Small 9in Deck Mount Base Plate
Our most popular and secure base type is the deck mounting plates. The smaller plate is made of a full 1/2in thick cast aluminum polished to a shine, 9in diameter with 4 bolt holes . The larger 16in diameter plate is silver powder coated steel, 5/16" thick and has 6 bolt holes. Both can be easily installed to any wooden deck made of nominal 2" lumber, or to most any concrete patio. Mounting surface should be solid and level for best results. Umbrella support tube can be easily removed when not in use, minimizing tripping hazard. Bolts and/or concrete anchors are NOT included and must be obtained elsewhere to suit your specific need.
Large 16in Deck Mount Base Plate
The Deck Mount Base does NOT include the square verticle tube as this is part include with the umbrella. The small 9in plate works with any C-Series FIM umbrella and the large 16in plate works with the P-Series FIM umbrellas and with the Flexy 8 or Flexy 10 awnings only. (Not for use with the Flexy Twin or Flexy Zen models)
FIM Deck Mount Plate Installation Guide
Last Updated: 09/12/2024 05:42 PM - ID:1828