3 Leg Metal End Frame Fitting - 3.5in OD
Steel Metal Swing Set Hardware for 3in ID Pipe
You will need (2) End Frame Fittings to build your own metal swingset. These are heavy duty three-legged End Frame Fittings for three 3-1/2in OD metal pipe legs and a 3-1/2in OD metal pipe swing beam. One fitting fits at each end of the swingset. One Metal End Frame Fitting will work at either the right or the left end. You will need Schedule 40, 3in pipe for your swingset. (Pipes are known for their inside diameter) National Test Lab Results: 5000 lbs. Commercial Grade. These fittings include all the hardware required to attach to 4 pipes.
Pipe Leg Lengths Needed for Different Swing Beam Heights
(Leaves approximately 2ft of pipe in the ground)
|Beam Height||Middle Leg Length||OuterLeg Length|
|9ft High||11.74 ft.||11.74 ft.|
|10ft High||12.82 ft.||12.82 ft.|
|11ft High||13.71 ft.||13.91 ft.|
|12ft High||14.77 ft.||14.99 ft.|
Each 2 swing position beam should be at least 9ft in width. Schedule 40, 3 Inch pipe is recommended. Schedule 40, 3" pipe is 3" inside diameter and 3-1/2in outside diameter.
The price below is for 1 end frame fitting. You normally need (2) End Frame Fittings for (1) free standing metal swing set. (one for each side)
Last Updated: 02/04/2019 02:32 AM - ID:6732