Commercial Rubber Belt Swing - S130

Vandal Resistant with Metal Insert - EDPM Rubber - Commercial Rated

Tweet

This Commercial Belt Swing is made with LATEX-FREE EPDM rubber, vandal resistant, playground swing seat is perfect for your outdoor playground needs. It will not cause allergic reactions to rubber sensitive kids. The playground belt swing seat is 24" long by 6" wide and is a robust 5/16" thick. What makes this playground swing seat vandal resistant? Each seat has a heavy-duty, steel metal strip molded into the seat, running length-wise, from edge-to-edge. This means even if the seat is cut, the playground swing seat remains intact. The insert has a bent edge to prevent injury if the seat is cut. Each seat is features a galvanized steel triangle hanger at each end, making this seat one of the most vandal resistant seats on the market. Won't fade or weather, looks great for years.

Galvanized welded triangular hardware makes this one of our sturdiest and most popular Commercial Grade swing seats. The dimensions of the seat are 24" x 6" x 5/16" or 30.25" hanger to hanger. It is made with 70 EPDM rubber with a metal insert to resist vandalism. EPDM: Ethylene-propylene-diene-monomer is a synthetic rubber material which helps prevent crazing, cracking and oxidizing. Natural rubber is often made from recycled tires etc., and you are never sure what the actual rubber mixture is. It often wears off on children's clothes. It cracks and crazes, making the seat unsightly and allowing moisture to get into the seat. This makes the seat deteriorate at a much quicker rate. This seat is made of EPDM rubber that is made especially for our swing seats. The rubber does not rub off on children's clothes and the seats last much longer than natural rubber swings. Unlike seats made of polymer, seats made of EPDM rubber hold up well in extreme temperatures, both very hot and very cold. Our seats have galvanized steel triangles and steel plates that are riveted to the seat with galvanized rivets. We go to the added expense of welding each triangle together so they cannot be pulled apart and pulled off the seat. We believe our swings are one of the few that have these welded triangles. The triangle is constructed of 3/8" dia. cold rolled steel with the ends welded together. The plate is 1/16" thick hot rolled stamped galvanized steel. The rivets which are used to rivet the plate through the EPDM rubber and steel insert are made of 1/4" diameter steel. There are three rivets on each side of the seat.

The S130 seat has a rounded edge steel insert, full hard, painted with a non-rusting adhesive, and then coated with rubber that is from 1/4" to 3/8" thick. This is a new innovation by Jensen that is not offered by other manufacturers, which helps prevent a child from being cut if the rubber is ever cut or torn off of a seat. We believe our seats are made to the highest standards available. Customers cannot see many of the extra hidden safety features. Uninformed users may think our seats and another suppliers are the same. However, they may not have added the hidden safety features that we have because of the added costs. We feel these safety features benefit the strength of our swings and the well-being of the children that use our equipment. The seat's insert rounded edges to help prevent injuries from sharp edges and then encased in EPDM rubber. The seat should last a minimum of 2 years in harsh and heavy use conditions. Tensile strength is 3100 lbs.