Custom Sandbox Covers - Vinyl
(Click for Larger View)

Custom Sandbox Covers - Vinyl

Buy a Mesh or Solid cover for your Sandbox to keep it clean

Looking for a custom sandbox cover or tarp to fit your freestanding sandbox or the one under your swing set fort or deck? Are you trying to prevent the neighborhood cats from using it as a litterbox? Do you just want to keep it clear of leaves, twigs and debris for a safe place for your child to play in the sand? Even if you have a unique shape, crazy pole placements, or any odd request, we can make a sandbox cover any size, shape that you may need.

Only the best materials are used to make our covers. We offer 11oz Mesh or 15oz solid marine grade vinyl. Covers with cut-outs are always reinforced to resist tearing. Most covers are attached with stainless steel snaps that are easy to put on or take off. We also offer many other ways to secure your cover: grommets, weight pockets, bungee balls, velcro, rod pockets and elastic hems to mention a few. Send us some picture of your sandbox, dimensions, and needs, and we'll be happy to make some suggestions for you!

We make them FAST! Covers usually take 5-10 business days to make and ship most times of the year, (current lead time is shown below). Please make sure you supply accurate outside edge to outside edge dimensions of the sandbox. Finished dimensions will be accurate to within 1 inch.

15oz Solid Vinyl Sandbox Cover Colors

11oz Mesh Sandbox Cover Colors


Custom Sandbox Cover Features / Options

If the custom sandox cover options at the bottom of this page cannot fulfull your need, then used this form.
Sandbox Covers Quote Request
Fill out and fax completed form to 901-531-8145 or you can scan it or take a picture with your smart phone and email it to email at the bottom of this page.

Example: Suppose you have a 60in x72in sandbox (measured outside edge to outside edge) with 4x4 posts in each corner, the sand walls are outside the posts and 1-1/2in thick, and you want it to drop down the outside of the sandbox wall 3 inches:  The finished cover will be 66in x 78in with 8-1/2in square cutouts on each corner.   The 8-1/2in cutout is enough to accommodate the 3in drop plus the 1-1/2in for the andbox wall (We will need the width of these sand wall boards), and 4in for the post.   We know that a 4"x4" post is actually 3.5"x3.5", but suggest the extra 1/2" to give you a little wiggle room.

All custom sandbox covers are made to your specifications.   Therefore all sales are final.   No refunds or returns can, or will, be accepted.

Check out our Standard Sized Quick Ship - Mesh Sandbox Covers if you have a 4x4, 5x5 or 6x6 Square Sandbox with 4x4 Corner Posts.

Features of Custom Sandbox Covers - Vinyl
  • Vinyl Mesh 11 oz. - Blue or Green
  • Solid Vinyl 15 oz. - THE THICKEST IN THE INDUSTRY - Blue, Green, Yellow, Red or Tan
  • Both Mesh and Solid are made of Mildew Retardant vinyl.
  • Solid is Triple layered constructed with nylon mesh center for superior strength
  • Full UV Protection
  • Waterproof and Weather Resistant (of course not the mesh silly)
  • Grommets or Snaps will be positioned at corners and evenly spaced about every 12-18 inches
  • All corner cutouts are reinforced to resist ripping.
  • To determine the square footage of the cover you need multiply the length in inches X the width in inches, then divide that total by 144 (the number of square inches in a square foot).

  • Custom Sandbox Covers - Vinyl - ID#:3L-SBC
    Dimensions (LxW) in Inches:
    Square Footage:
    Sand Wall Thickness (If you have Posts):
    Corner Cutouts:
    Additional Cutouts:
    Drain Hole Grommet:
    Regular Price: $179.99
    Sales Price: $109.95
    You Save $70.04 or 38.91%

    Last Updated: 02/16/2024 12:02 PM - ID:313